Once you have created your Moultrie Mobile account, selected your desired plan, and activated your camera, you are minutes away from receiving pictures. With your EDGE Series camera, it's as simple as just turning the camera on!
1. Power the camera on.
- Switch your camera to the ON position.
- You will see the battery indicator light showing your current battery strength, then the CONNECTING light should begin flashing.
- Once the connection is established, the CONNECTED status light will be illuminated briefly and then all status lights will cycle off once communication is complete.
- Once the lights are off, your camera will be ready to take a picture.
- If you are seeing the red NOT CONNECTED status light, please ensure you have an active subscription and move locations to ensure you are in a good signal area.
2. Capture a test picture.
- Press and release the CONNECT button.
- The status lights will illuminate while the camera connects to upload the picture.
- Once the lights cycle off, the communication is complete.
- Refresh your app by sliding your finger down on the screen, then release.
- If successful, the test image should show up in your gallery.
Pro Tips:
- Activate and connect your camera at home.
- Make sure that your camera connects and sends some test photos.
- Once complete, turn the camera off and mount it on your next trip to the field.
- Before mounting, power it on and press CONNECT a few times to send test pictures.
- Check your app for the test pictures by pulling down from the top of the Gallery page to refresh it.
- As you receive your test photos, check the signal strength on your camera in the app.
- If it’s not connecting or shows NONE for signal, you’ll need to move the camera to a different location.
- Check the signal after each connection from a different location to ensure you are in the best signal area.
Still Need More Information? We’re Here to Help! Use the link below to Contact Us.