Not sure if this is your device? This article is for the EDGE 4 PRO SOLAR camera. Double-check this info or click here to visit our "Identify My Device" page before you continue.
Getting Connected
Follow the steps below to connect your EDGE 4 PRO SOLAR camera for the first time.
Step 1 Download the Moultrie App
Download the Moultrie app from the App Store (iOS) or Google Play Store (Android) and sign in to your account, or create a new one.
Step 2 Activate Your Camera
In the app, tap the + icon to add a new device.
Scan the QR code on your camera label or enter the Modem ID manually.
Follow the on-screen instructions to select a subscription plan and activate your device.
Step 3 Install the Battery Pack & Power On
Ensure the PG-2284 rechargeable battery pack is fully charged via USB-C before installing.
Insert the battery pack into the camera and switch the power to ON.
Step 4 Connect
Once powered on, the camera will begin searching for a signal. Press the Connect button to trigger a manual connection attempt.
The yellow Connecting light will flash. Once connected, the green Connected light will briefly illuminate before all lights cycle off.
Check your app — your first image or test connection should appear within a few minutes.
Tips
Make sure you are in an area with good cellular coverage.
The entire activation and first connection process should take 5 minutes or less.
If you see the red Not Connected light, move the camera to a location with stronger signal and try again.