Not sure if this is your device? This article is for the EDGE 4 cameras (Edge 4 NW & Edge 4 First Lite). Double-check this info or click here to visit our "Identify My Device" page before you continue.
Once your camera is activated and your plan is selected, getting your first picture is simple. Here's how.
1. Power On
- Flip the power switch to ON.
- The battery indicator lights briefly, then CONNECTING begins flashing.
- When CONNECTED lights up and then goes off, the camera is live and ready to shoot.
- Seeing NOT CONNECTED (red)? Confirm your plan is active in the app and move to a stronger signal area.
2. Send a Test Picture
- Press and release the CONNECT button.
- Status lights flash while the image uploads.
- Once the lights cycle off, open the app and pull down to refresh your Gallery.
- Your test photo should appear within a minute.
Pro Tips: If signal shows NONE in the app, try a different location; even a few feet can make a difference. • All lights turn off once the connection attempt finishes, whether or not it connected.
Still need help? Chat with us at support.moultriemobile.com or call 1-844-908-1219.