EDGE: No Power

Not sure if this is your device? This article is for EDGE (SKU/Product #: MCG-14076 & MCG-14089). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Troubleshooting

If your camera will not power on, follow the steps below to resolve.

Step-by-Step Fix

1. Remove the batteries.
2. Turn the camera ON for 10 seconds (with no batteries installed).
3. After 10 seconds, turn the camera OFF and insert a NEW set of recommended batteries.
   1. Energizer & Moultrie brands of batteries are recommended.
4. Turn the camera back ON.

If It Still Won’t Power On

Please send in images of the following:

• All sides of the camera, including the top and bottom of the battery tray (contact points must be clearly visible).

Please record a short video and include the following:

• Inserting the NEW recommended batteries used during troubleshooting.
• The full power-on sequence (any lights/indicators that appear if any).

Reach out to us with the images and video. Also include your physical shipping address. Once we receive the video, our team will follow up with next steps.