Calibrate - Electronic Feed Gate Spreader Troubleshooting

Not sure if this is your device? This article is for the Electronic Feed Gate Spreader (SKU/Product #: MSS-12722). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Troubleshooting

To ensure proper operation, the spreader should be calibrated each time it is first connected to a vehicle. To calibrate it, please follow the below steps:

1. Hold the “Off” button and the “On” button for a few moments.
   1. When calibrating, the lights will flash rapidly. Once the calibration is complete, the lights will go out and the gate will close. The unit is now ready for operation.