Congratulations! Now that you have your new Edge camera, please see the video and step-by-step instructions below for activating your device.
Watch Our Video
STEP 1
Activate Camera & Select Your Plan
Log in to your Moultrie Mobile account through the app or at moultriemobile.com. Tap the Profile Icon on the top left of your gallery page, then select Activate Device and follow the on-screen instructions to choose your plan and activate your camera.
STEP 2
Install Batteries
Once your camera is activated, install 8 or 16 Alkaline or Lithium batteries. Your new EDGE camera is equipped with a double-sided battery tray. The camera will operate efficiently with 8 batteries, or you can enjoy extended battery life using 16.
Note: The battery tray will need one OR both sides completely filled. If using only 8 batteries, please ensure that all 8 are on ONE side of the battery tray.
STEP 3
Power Camera On
Switch your camera to the ON position. You will see the battery indicator light showing your current battery strength. Then, your camera will attempt to establish a connection and you will see the CONNECTING light flashing on your camera. Once established, the CONNECTED status light will be illuminated briefly and then all lights will cycle off. Once the lights are off, your camera will be ready to take an picture.
Note: If you are seeing the red NOT CONNECTED status light, please ensure you have an active subscription and move to ensure you are in a good signal area.
STEP 4
Capture A Test Picture
Press and release the connect button. The status lights will illuminate while the camera connects to upload the picture. Once the lights cycle off, refresh your app or the website to ensure your picture was uploaded.
Still Need More Information? We’re Here to Help! Use the link below to Contact Us.