300LB Metal Broadcast Feeder (SKU/Product #: MFG-15129)
Having trouble connecting your feeder to the Moultrie app over Bluetooth? Work through the steps below.
Before You Start
- Download the Moultrie app and create an account before trying to pair. An account is required before the feeder can be added via Bluetooth.
- Enable Bluetooth in your phone's system settings, not just an in-app toggle; the feeder won't appear if your phone's system Bluetooth is off.
- Make sure the timer is powered on and the antenna is attached and facing toward you.
Feeder Not Appearing in the App
- Confirm Bluetooth is enabled in your phone's settings and the timer is powered on.
- Restart the Moultrie app.
- Power cycle the timer: disconnect power for 30 seconds, then reconnect.
- Move closer to the feeder. Bluetooth range is up to 100 yards, but obstructions (buildings, dense trees, terrain) can shorten that.
- Face the timer's external antenna toward you and try pairing again.
| NOTE: If the feeder still doesn't appear after a full power cycle and app restart, give us a call so we can check whether the timer has registered correctly. |
Good to Know
- The Moultrie app is not required to run the feeder, but it's recommended. Bluetooth scheduling, on-demand feeds, and diagnostics all run through the app.
- No subscription is required to control this feeder over Bluetooth through the app.
- A cellular subscription is only required if you want to use Moultrie Connect to integrate this feeder with a compatible EDGE camera (EDGE 3, EDGE 3 Pro, EDGE 4, or EDGE 4 Pro).
- App version 6.0 or later is required.