Replace your original Universal Digital Timer with our new Universal Digital Timer II! Schedule up to 10 feed times per day and customize run times with this easy-to-install digital timer kit. Designed for use with Moultrie 6-Volt feeders running on a sealed, lead-acid battery or Pro Hunter D-cell battery clip. It’s also compatible with most other 6-Volt and 12-Volt makes. See below for steps on programming your Universal Digital Timer II.
1. From the home screen, press PROGRAM to begin editing, the hour should start blinking:
To Set Current Time:
- Toggle Up/Down to set the hours
- Toggle Right to switch from hours to minutes
- Toggle Up/Down to set the minutes
- Press PROGRAM when time is correct to continue to next step
To Set Current Date:
- Toggle Left/Right to select the current date
- Press PROGRAM when date is correct to continue to next step
To Set Feed Remaining:
- Toggle Up/Down to set feed remaining in pounds
- Press PROGRAM when correct to continue to next step
To Set Timer 1:
From the Timer 1 setting screen, use directional arrows to navigate to your desired setting and press PROGRAM to begin editing.
-
Days of the week (toggle down once)
-
- Press PROGRAM to edit
- Toggle Left/Right to select which day to edit
- Toggle Up/Down to deactivate feeding on a specific day(s)
- If the highlighted day is activated, you will see 'SET' directly below the row of days
- Press PROGRAM when days of the week are correct
-
-
Feed Time (toggle down once)
-
- Press PROGRAM to edit
- Toggle Up/Down to change hours
- Toggle Right to switch to minutes
- Toggle Up/Down to change minutes
- Press PROGRAM when feed time is correct
-
-
Feed Duration (toggle down twice & left once)
-
- Press PROGRAM to edit
- Toggle Up/Down to change feed duration in seconds
- Press PROGRAM when feed duration is correct
-
-
Motor Speed (toggle down three times)
-
- Press PROGRAM to edit
- Toggle Left/Right to set motor speed to hi, med, or low
- Press PROGRAM when motor speed is correct
-
2. Timer 1 is now set. Press BACK to return to the home screen, or toggle Left/Right to continue to edit the remaining 9 feed times, if desired. Otherwise, Timer 1 settings will be used across all the days you have active for it.
3. Run a test feed. From the home screen, press TEST.
- Toggle Up/Down to change the test duration
- Press PROGRAM to change motor speed
- Press PROGRAM to begin the test
- There will be a 5-second countdown before the test begins allowing you to move to a safe distance.
Pro Tips:
- The timer comes with a reset button on the back for troubleshooting
- Issues with your timer are typically the result of the feeder battery.
Watch Our Video:
Still Need More Information? We’re Here to Help! Use the link below to Contact Us.