Looking to convert your Manual Feed Gate Spreader to and Electronic Feed Gate? Please continue reading for instructions on that process.
Converting your Manual Feed Gate to an Electronic Feed Gate:
Parts you will need:
How to Install:
1. Remove push gate parts from the hopper - 3/8 nut = 9/16 socket
2. Remove the stiffener from the bottom of inside barrel - 7/16
3. Remove the band from around the hopper - 5/16 nut = 1/2 socket
4. Remove eye bolt - 1/2 nut = 3/4 socket
5. Remove the 2 phillips head screws from the electric gate, then remove the top clear plate
6. Remove the slide gate part
7. Lay electric gate down onto the hopper, mark the 2 holes and drill through the hopper - drill bit 7/64
8. Insert the screws through the gate and bolt from inside the hopper
9. Replace slide gate and clear plate
Still Need More Information? We’re Here to Help! Use the link below to Contact Us.